Cc-Link Ie Field Network Synchronous Communication Function - Mitsubishi Electric NZ2GN2S1-32D User Manual

8.3
CC-Link IE Field Network Synchronous
Communication Function
I/O is performed with a synchronization cycle of the master station that supports the CC-Link IE Field Network synchronous
communication function.
This enables the I/O module to operate at the same timing as other slave stations on the same network.
The CC-Link IE Field Network synchronous communication function of the I/O module has the following two modes.
Operation mode
Synchronous X/Y control mode
Synchronous timing control mode
Applicable master station
When using the CC-Link IE Field Network synchronous communication function, use one of the following products for the
master station.
■MELSEC-Q/L series
Master module
QD77GF16
QD77GF8, QD77GF4
■MELSEC iQ-R series
Master module
RJ71GF11-T2
RJ71EN71
RnENCPU
RD77GF32, RD77GF16, RD77GF8, RD77GF4
To set the synchronization cycle in increments of 0.05ms, use one of the following products for the master station.
Master module
RJ71GF11-T2
RJ71EN71
RnENCPU
RD77GF32, RD77GF16, RD77GF8, RD77GF4
8 FUNCTIONS
104

8.3 CC-Link IE Field Network Synchronous Communication Function

Description
Controls I/O with the same timing as the synchronization cycle.
Controls I/O based on the elapsed time after the synchronization
cycle timing.
Reference
Page 105 Synchronous X/Y control mode
Page 108 Synchronous timing control mode
Serial number (first five digits)
"17102" or later
"17101" or later
Firmware version
"01" or later
Firmware version
"03" or later
"01" or later