Yamaha Pro IV Series Operating Manual page 72

CHAPTER 4: Recording
5
Tap on
The red part will be recorded.
To select the part to record
Tap on the desired part (
or not). (→ pg. 45)
To record the ensemble part
Tap on
pg. 49)
To switch the speaker output on and off
when recording
Tap on
following screen appears.
Tap on [Speaker], and press
[ON] and [OFF].
57
.
The white part won't be
recorded.
,
) to change its setting (record
and select the voice. (→
or repeatedly until the
to switch between
6
Tap on
the volume in [MIC]. (→ pg. 27)
7
Press
, or
then start playing the Disklavier or
singing into the microphone.
Recording starts.
8
Press
To play back the recorded song,
press
Note:
You cannot record audio data when re-
recording.
Note:
Metronome Mode recording (→ pg. 52) and
changing the default tempo (→ pg. 54) are not available
with this recording method.
, and then adjust
Volume bar
Adjusted value
Tap to exit.
to start recording, and
[Audio+MIDI
Recording] icon
appears.
to stop recording.
.