Recording A Song As Audio Data - Yamaha Pro IV Series Operating Manual

CHAPTER 4: Recording
Recording a Song as Audio
Data
A song that you play on the Disklavier and the audio
input from the MIC/LINE IN jack can be recorded in the
[User Library] as audio data (WAVE file).
1
Tap on
2
Select the desired album in the list
that appears.
3
Tap on
4
Tap on
55
in the [Main] Screen.
.
.
5
Tap on
To cancel the recording of the internal
voice of the tone generator
Tap on
To switch the speaker output on and off
when recording
Tap on or
following screen appears.
Tap on [Speaker], and press
[ON] and [OFF].
6
Tap on [Voice], and then the desired
voice. (→ pg. 49)
7
Tap on
the volume in [TG] and [MIC]. (→
pg. 27)
.
.
repeatedly until the
to switch between
, and then adjust
Volume bar (TG)
Volume bar (MIC)
Adjusted value
Tap to exit.