Table of Contents
Advertisement
Installation (Cont'd)
SHVSV Glass Adjustment
Follow these steps accordingly to properly and
safely adjust the position of the front glass.
BEFORE ADJUSTING GLASS
•
SET, LEVEL, AND BOLT TOGETHER ALL
CASES.
•
DOUBLE CHECK LEVELING FOR ALL
CASES.
•
DO NOT MOVE LINEUP DURING ADJUST-
MENT.
Glass can cause bodily damage. Check support
hinges for periodic mantenance. Opening adjacent
glass simultaneously could result in but not limited
to glass breakage, damage to merchandiser, serious injury
or death. To prevent injury, when glass is open,
take adequate safety measures to protect shoppers.
Glass must be parallel to ledge when viewed from
front. Glass height should be level with front ledge
as demonstrated below.
Do NOT remove shipping braces until the
merchandisers are properly anchored to the floor.
Merchandisers are top heavy and could tip over
causing serious injury. Merchandisers must
be braced before removing the lag bolts.
13
A
Advertisement
Table of Contents
