Using Bulk Dump Send/Sampling Send To Save Data; Saving Bulk Data/Sampling Data - Yamaha DJX Owner's Manual

USING BULK DUMP SEND/SAMPLING SEND TO SAVE DATA

USING BULK DUMP SEND/SAMPLING SEND TO SAVE DATA
The actual operation steps for these two functions are identical. The Bulk Dump Send func-
tion saves User Performance Setup and User Song. The Sampling Send function saves only
user-sampled data ("Sampled" voice, #284).

Saving Bulk Data/Sampling Data

1
First, set up the connected MIDI device for re-
cording the data.
The actual procedure may differ depending on your particular equip-
ment and software. For example, if you are using the Yamaha MDF3
MIDI Data Filer:
1) Make the appropriate MIDI connections.
2) Set up the MDF3 for recording MIDI data. (Refer to the
MDF3 Owner's Manual.)
2
On the DJX, select the Bulk Dump Send/Sam-
pling Send function.
Do this in the normal way:
1) Press the FUNCTION button.
2) Select the desired Function parameter with the numeric
keypad: #86 for Bulk Dump Send, or #88 for Sampling Send.
F86
STYLE
FUNCTION
YES
STYLE
FUNCTION
3
At the "BulkSnd?"/"SmplSnd?" prompt above,
set the operation to standby.
Press the + button to start the operation.
MIDI OUT
DJX
BulkSend
BulkSnd?
MIDI IN
MDF3
SmplSend
F88
STYLE
FUNCTION
SmplSnd?
YES
STYLE
FUNCTION
MIDI FUNCTIONS
The Bulk Dump Send/
Sampling Send functions
cannot be used in the
following conditions:
• While playing a pattern
• In the Song mode
• In one of the Recording
modes
• While calling up a
Performance Setup
• While receiving bulk/
sampling data
If you attempt the function
while in one of the above
conditions, "- - -" appears
in the display and the data
is not transmitted.
97