Using The Timer Function For Playback And Recording; Musiccast Server Timer Functions; Setting Playback Timer Details For The Musiccast Server - Yamaha MusicCAST MCX-1000 Owner's Manual

Using the Timer function for playback and recording

Use the Timer function to automatically start playback on the MusicCAST server or MusicCAST clients,
start recording on the MusicCAST server, or place MusicCAST components in standby or sleep modes at
the time you set in the Timer Setup screen on the MusicCAST server.

MusicCAST Server Timer functions

Setting playback Timer details for
the MusicCAST server
1 Press TOP MENU.
The Top Menu screen appears on the on-screen display.
2 Use / to move the cursor to "Timer Setup"
and press SELECT.
The Timer Setup screen appears on the on-screen display.
3 Use / to move the cursor to "Server Timer
Functions" and press SELECT.
The Server Timer Functions screen appears on the on-screen
display.
4 Use / to move the cursor to "Playback
Timer" and press SELECT.
The Playback Timer screen appears on the on-screen display.
5 Use / / / to move the cursor to "Use
playback timer". Press SELECT to place a
check in the checkbox.
To stop using the Timer function, use
cursor to "Use playback timer" and press SELECT to remove
the check from the checkbox.
6 Use / / / to move the cursor to the
numerical fields to the right of "Start". Use
to set the time you want the MusicCAST server
to begin playback.
7 Use / / / to move the cursor to the
numerical fields to the right of "END". Use
to set the time you want the MusicCAST server
to halt playback.
8 Use / / / to move the cursor to the
selection field to the right of "Playback" and
press SELECT.
The playback selection field appears.
97 97
/ to move the
/ /
/
/