Yamaha MusicCAST MCX-1000 Owner's Manual page 118

System setup
3 Set the date and time.
• To set the date and time manually
Remove the check from the "Use NTP server" checkbox,
and use / / / to move the cursor to the field you want
to set. Use / / / to change the setting.
• To connect to the NTP server and set the date and
time automatically
Place a check in the "Use NTP server" checkbox.
Use / / / to move to cursor to the right of the "Use NTP
server" field and press SELECT. The character entry screen
appears on the on-screen display. Use this screen to enter the
address of the NTP server. Refer to the user's information
guide from your Internet provider or NTP service for this
address. If may be an IP address, or URL. If you want to use a
URL, please confirm that you have set the DNS setting of the
MusicCAST server correctly first (see page 108).
Refer to page 78 for an explanation of how to use the character
entry screen.
When you finish entering the address, use
the cursor to "OK" and press select. Select "Cancel" to return
to the Date/Time screen without changing any settings.
Use the same method to set your time zone, and the frequency
with which you want the MusicCAST server to access the NTP
server.
Use / / / to move the cursor to the "Synchro. interval"
field and use /
the MusicCAST server to access the NTP server for time and
date updates.
Use / / / to move the cursor to the "Time zone" field
and use / to select an appropriate time zone.
If you are in a time zone that is using daylight saving, use
/ / to move the cursor to "Daylight saving" and press
SELECT to place a check in the checkbox.
4 Use to move the cursor to "OK" and
/ / /
press SELECT.
The on-screen display Returns to the System Setup screen.
Select "Cancel" to return to the System Setup screen without
changing any settings.
HINT
HINT
Press BACK to return to the previous screen.
• Check that the MusicCAST server is correctly connected to
the Internet when you attempt to connect it to the NTP
server.
• You should set this parameter again if you disconnect the
MusicCAST server from the AC outlet for more than 1
minute.
118
/ / / to move
to set the time interval at which you wish
/