Step 3: Setting The Osd Language; Step 4: Setting The Disc Language (Audio, Subtitle, Disc Menu) - Yamaha CinemaStation DVD-S30 Owner's Manual

4
Press or to select "OK", and then press
ENTER.
Repeat step 4 in the re-confirmation screen.
CHANGING MULTI TO PAL:
1.ENSURE THAT YOUR TV SUPPORTS
PAL STANDARD.
2.IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV. WAIT 15
SECONDS FOR AUTO RECOVER.
OK
CONFIRM AGAIN TO USE NEW TV
TYPE SETTING.
OK
y
To return to the previous menu, press
menu, press SETUP.
Notes
• When using a wide-screen TV, set "TV DISPLAY" in "VIDEO
SETUP PAGE" to "16:9". For details, refer to "TV DISPLAY"
(page 23).
• Setting an incorrect TV color system distorts the picture on the
TV and makes menu operations difficult. To switch the TV
color system (NTSC and PAL) in such a case, press
AUDIO while no disc is inserted ("NO DISC" appears on the
front panel display).

■ Step 3: Setting the OSD language

You can select a language used for the on-screen display.
(The default setting is "ENGLISH".)
GENERAL SETUP PAGE
DISC LOCK
DISPLAY DIM
PROGRAM
OSD LANGUAGE
SCREEN SAVER
SLEEP
SET OSD LANGUAGE
1
Press SETUP to display the Setup menu on
the TV.
2
Press or to select "GENERAL SETUP
PAGE", press or
LANGUAGE", and then press
3
Press or to select a language, and
then press ENTER.
y
To return to the previous menu, press
menu, press SETUP.
CANCEL
CANCEL
. To close the Setup
and then
ENGLISH
FRANÇAIS
to select "OSD
.
. To close the Setup
■ Step 4: Setting the disc language
(audio, subtitle, disc menu)
If you set the disc language, this unit will automatically
switch to the selected language (for audio, subtitle and
disc menu) when a disc is loaded. If the selected language
is not available on the disc, the disc's default language will
be used instead. (The default setting is "ENGLISH" for
audio and disc menu and "OFF" for subtitle.)
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3 / JPEG NAV
VR LIST
PREFERRED AUDIO LANGUAGE
1
Press SETUP to display the Setup menu on
the TV.
2
Press to select "PREFERENCE PAGE",
press or to select "AUDIO",
"SUBTITLE" or "DISC MENU", and then
press .
Note
"PREFERENCE PAGE" is available only when no disc is
inserted or the unit is in the Stop mode (page 11).
3
Press or to select a language, and
then press ENTER.
If the desired language is not listed, select
"OTHERS", use the Number buttons to enter the 4-
digit language code (page 28), then press ENTER.
y
To return to the previous menu, press
menu, press SETUP.
OPERATION
ENGLISH
CHINESE
JAPANESE
KOREAN
FRENCH
SPANISH
PROTUGUESE
. To close the Setup
9