Analog Connections; Video Connections - Yamaha DVD-S510 Owner's Manual

DIGITAL OUT
PCM DIGITAL
MPEG DTS
1
2
OPTICAL COAXIAL
AV receiver
AUDIO OUT
1 1 VIDEO OUT
2 2
AL R L VIDEO P P Y
R B
COMPONENT VIDEO
<C> <A>
V
Y P C P C
B B R R
VIDEO COMPONENT
VIDEO IN
AV receiver
COMPONENT S VIDEO VIDEO
VIDEO OUT OUT OUT
COMPONENT S VIDEO VIDEO
VIDEO IN IN IN

Analog Connections

AUDIO OUT
Connect AUDIO OUT L (left) and R (right) jacks of this DVD player to
corresponding input jacks of your audio equipment such as AV receiver.
R L VIDEO
R L
L
R
1 CD/DVD
R L

Video Connections

If your AV receiver has video output jacks, connect your receiver (and then
to your TV) so that you can use one TV for several different video sources
(LD, VCR etc.) by simply switching the input source selector of your receiver.
S VIDEO
This DVD player has three types of video output jacks. Use one of them in
accordance with the input jacks of the equipment to be connected.
Component Video terminal <A>
<B>
Component video connection achieves high fidelity in reproducing colors
S
(better performance than S-video connection), separating video signal into
luminance (Y, terminal color-coded as green), and color difference (P
red). Use commercially available coaxial cables. Receiver (and TV) with
S VIDEO
INPUT
component input is required. Observe the color of each jack when
connecting. If your receiver does not have component output jacks,
connecting this DVD player's component output directly to your TV's
component input can reproduce better video image.
Note
• Do not connect this DVD player's COMPONENT VIDEO OUT jacks to
component video input jacks special for HD (High-Definition) TV.
S-Video terminal <B>
S (separate) video connection achieves a clearer picture than composite
video connection by separating color and luminance when transmitting
signals. Use commercially available S-video cable. Receiver (and TV) with
S-video input is required.
Composite Video terminal (1, 2) <C>
Use RCA video cable supplied with this DVD player when connecting this
DVD player to a TV.
VIDEO 1, 2 jacks of VIDEO OUT output the same signal. You can connect
one to your receiver's input using supplied RCA cable, and the other to
another receiver or a TV.
, blue/P ,
B R
PREPARATION 15