Bose VCS 10 Series II Owner's Manual page 12

Setting Up
Figure 8
Making cube speaker connec-
tions
10
Note: If you want to use other speaker cable or need to lengthen the supplied cables, call
®
Bose customer service. See page 15 for descriptions of applicable accessories. The cus-
tomer service numbers can be found inside the back cover.
Connect the Acoustimass
speakers
Use the 20 foot (6 m) cable with three pairs of wires to connect the Acoustimass module to
the center and front cube speakers.
Note: You can use any cube array in any position.
1. Connect the wire pair marked CENTER to the cube array you have placed in the center
speaker position. Press the terminal tab on the back of each speaker. Then, insert the
marked wire into the red terminal and the plain wire into the black terminal. Release the tab
to secure the wires in place. See Figure 8.
2. Connect the wire pair marked RIGHT to the cube array you have placed in the right front
position (to the right of the TV as you face it) in the same way.
3. Connect the wire pair marked LEFT to the cube array you have placed in the left front
position (to the left of the TV as you face it).
October 22, 2001
®
module to the center and front cube
Marked wire
to red terminal
AM19464_02_V.pdf