Erase; Disc Erase; Track Erase - Yamaha MDX-9 Owner's Manual

ERASE

The ability to erase sound without having to re-record is
another convenient function. You can erase the entire disc,
a single track, or just part of a track.
s
NATURAL SOUND MINIDISC RECORDER MDX-9
TIMER
OFF
REC PLAY
POWER
DISPLAY TITLE CHARA. DELETE
CANCEL
CANCEL
EDIT

Disc Erase

This operation lets you erase all audio and title (character)
data to create a blank MD. Please note that once erased,
this data cannot be recovered.
1
Press & STOP to set this unit to stop mode.
2
Press EDIT repeatedly to display "Disc Erase?",
then press ENTER.
"DiscEraseOK?" appears in the display.
3
Press ENTER again.
When all audio, name and title data has been erased
"Complete" appears momentarily.
To cancel before erasing the entire disc
Press CANCEL (or & STOP).
To undo ERASE
Press & STOP to set this unit to stop mode.
1
2 Press EDIT repeatedly to display "Undo Erase", then
press ENTER.
"Undo OK ?" appears in the display.
3 Press ENTER again to undo.
To cancel, press CANCEL (or & STOP).
18
SEARCH # PLAY/
! ⁄
* PAUSE
)
! SEARCH ⁄
# PLAY/
& STOP * PAUSE
REC LEVEL
REC
EDIT SET INPUT
ENTER
— + 0 10
$ ›
& STOP
ENTER Jog dial

Track Erase

This operation lets you erase a single track. After you erase
the track, the total number of tracks decreases by one and
all tracks following that track are renumbered.
If you plan to erase two or more tracks
To avoid confusion you should always erase from higher track
numbers to lower track numbers. This prevents accidental
renumbering of tracks you plan to erase.
1
Turn the jog dial to select the track you want to
erase.
2
Press EDIT repeatedly to display "Erase ?", then
press ENTER.
"(track number) EraseOK?" appears in the display.
3
Press ENTER again.
The track is erased and "Complete" appears momentarily.
To cancel before erasing the track
Press CANCEL (or & STOP).
To undo ERASE
Press & STOP to set this unit to stop mode.
1
2 Press EDIT repeatedly to display "Undo Erase", then
press ENTER.
"Undo OK ?" appears in the display.
3 Press ENTER again to undo.
To cancel, press CANCEL (or & STOP).