Storing Your Own Programs - Yamaha EMX-100CD Owner's Manual

STORING YOUR OWN PROGRAMS

CD CHANGER RECEIVER EMX–100RDS
DISC
1 2
STANDBY/ON
PHONES
USER
1 2
3 4
1
1
6
6
A
TIME PROG
MODE REPEAT
DISC SKIP
1
CENTER/REAR
TEST
/DELAY
ECHO
LEVEL
SLEEP
1
2 1
INPUT SELECTOR
VCR/LD-TV/CD/TUNER/TAPE•MD/AUX
OPEN/
CLOSE
DISC
CHANGE
3
RANDOM REPEAT TIME
PROGRAM
HOUR MIN
PRESET/TUNING/BAND A/B/C/D/E
MUSIC
MIC
DISPLAY
USER MEMORY
4, 2 2 3, 5
CD
2 3 4 5
2 3 4 5
7 8 PRESET
7 8 9 0
B C D E
+
I0
RANDOM OPEN/CLOSE TUNER
STOP PLAY/PAUSE
2
INPUT
FLAT
4, 2 2
MUSIC PROGRAM USER
POWER
DISPLAY
VOLUME
Your favorite pair of any equalizer mode (or an equalizer
pattern of your own adjusting) and any sound field program
can be stored as a user program. Up to 4 pairs can be stored
as desired.
To store
1
Select a desired equalizer mode by pressing the MUSIC
button.
VOLUME
* If desired, adjust the equalizer as you prefer by using
the equalizer control buttons.
2
MEMORY AUTO/MAN'L
Select a desired sound field program by pressing the
TIME ADJ TIMER
PROGRAM button.
MIC MIXING
3
MIN MAX
Press the user program MEMORY button.
* "1" will flash on the user program number indicator and
the MEMORY indicator will flash for about 5 seconds.
4
Select the user program number (1, 2, 3 or 4) to which
you will store the selected modes by pressing the USER
button once or more before "1" stops flashing.
* Whenever you press the USER button, the user
program number changes and is displayed as follows.
USER 1
5
Press the user program MEMORY button before the
number selected in step 4 stops flashing.
* In the same way, store other pairs to other three user
positions.
* It is also a good idea to store only an equalizer pattern of
your own adjusting (without storing any sound field
program).
Notes
•
A new program can be stored in place of the former one.
•
In step 4 or 5, if the user program number indicator stops
flashing before operation, return to step 3.
To recall a user program
1 1
Play back a source. (For source playback, refer to the
sections beginning on page 13.)
2 2
Press the USER button once or more so that the user
program number you want to recall lights up.
* Whenever you press the USER button, the user
program number changes and is displayed as follows.
USER 1
E-30
USER 2
USER 4
USER 2 USER 3
OFF
USER 3
USER 4