Basic Operation - Yamaha CDX-993 Owner's Manual

1
1
Turn the power on.
2
Load a disc.
OPEN/
CLOSE
Display information during disc play
3 4 5 6 7 8 9 10 11 12
1 Shows the track number selected or being played.
2 Shows the time displays. (Refer to "Selecting time displays"
on page 10.)
3 Shows the CD track numbers (up to 20). After each track is
played, its corresponding number disappears so that
remaining track numbers can be seen at a glance.
To turn off the power
Press the POWER switch again.
* If you turn on the power again with a CD in the tray, you can
start playing the CD automatically.
8

BASIC OPERATION

POWER
POWER
Label side up
POWER
Disc tray
SINGLE
3
Close the disc tray.
4
AUTO
DISPLAY OFF
Play will begin from the first track of the disc.
Notes
• After closing the disc tray by pressing the OPEN/CLOSE
button, the display shows the total number of tracks and the
total recorded time of the disc for a few seconds.
1 2 3 4 5 6 7 8 9 10 11 12
• You can also close the disc tray by pressing the PLAY button
(or
RANDOM button, or by pressing the front edge of the disc
tray gently. If the tray is closed in any of these ways, play will
begin automatically, however, the display will not show the
total number of tracks and the total recorded time of the disc.
OPEN/
SYNCHRO DIMMER TIME CLOSE
SPACE PEAK TAPE CLEAR PROG
1 2 3
INDEX
+
4 5 6 I0
7 8 9 0
REPEAT RANDOM
SEARCH
– +
OUTPUT LEVEL SKIP
STOP PAUSE PLAY
OPEN/
CLOSE
PLAY
TOTAL
button on the front panel), a number button, the
2, 3
4