Additional Settings; Adjust The Image - Axis M30 Series User Manual

AXIS M30 Network Camera Series

Additional settings

Additional settings

Adjust the image

If you want to know more about different image settings, see Learn more on page 16.
Rotate image (Digital roll)
To rotate the 360° view, go to System > Orientation and use the slider.
You can also use the text field to change the roll angle.
Note
All views will be affected when you rotate the image.
Configure Quad view
1. Select Quad view among the live feed sources.
2. Go to Settings > System > Orientation and click
3. Change the view order by drag and drop the yellow boxes.
Note
Quad view is available in these mounting modes:
• Desk
• Ceiling
About capture modes
A capture mode is one of the possible views for this product and can be accessed from the drop-down list in the product's live
stream view.
Note
Selecting capture mode "360° overview only @ 60/50 fps no WDR" on AXIS M3067-P and capture mode "360° overview
only @ 30/25 fps no WDR" on AXIS M3068-P, there will be only Overview available. For the other capture modes see the
tables below for supported views/resolutions.
View
Overview
Panorama
Double Panorama
Quad View
Symbol Aspect ratio
1:1
8:3
16:9
32:9
4:3
16:9
4:3
16:9
.
Resolutions M3067-P
2016x2016 to 160x160
2560x960 to 192x72
2560x1440 to 256x144
2560x720 to 1280x360
2560x1920 to 256x192
2560x1440 to 512x288
2560x1920 to 256x192
2560x1440 to 512x288
9
Resolutions M3068-P
2880x2880 to 160x160
3584x1344 to 192x72
3840x2160 to 256x144
3584x1008 to 128x360
3584x2668 to 384x288
3584x2016 to 512x288
3584x2668 to 384x288
3584x2016 to 512x288