Axis M30 Series User Manual
Hide thumbs
Also See for M30 Series:
- User manual (57 pages) ,
- Installation manual (32 pages) ,
- Repainting instructions (5 pages)
Related Manuals for Axis M30 Series
Summary of Contents for Axis M30 Series
- Page 1 AXIS M30 Network Camera Series AXIS M3067-P Network Camera AXIS M3068-P Network Camera User Manual...
-
Page 2: Table Of Contents
AXIS M30 Network Camera Series Table of Contents About this manual ......... . -
Page 3: About This Manual
AXIS M30 Network Camera Series About this manual About this manual This user manual describes several products. This means you may find instructions that aren’t applicable to your product. -
Page 4: Product Overview
AXIS M30 Network Camera Series Product overview Product overview Control button Status LED indicator Network connector (PoE) SD card slot Part number (P/N) & Serial number (S/N) -
Page 5: Find The Device On The Network
Find the device on the network Find the device on the network To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support. -
Page 6: Access The Device
Bonjour as a browser bookmark, go to Safari > Preferences. If you do not know the IP address, use AXIS IP Utility or AXIS Device Manager to find the device on the network. 2. Enter the username and password. If you access the device for the first time, you must set the root password. See Set a new password for the root account on page 6 . -
Page 7: Webpage Overview
AXIS M30 Network Camera Series Access the device Webpage overview Live view control bar Live view Product name User information, color themes, and help Video control bar Settings toggle... - Page 8 AXIS M30 Network Camera Series Access the device Settings tabs...
-
Page 9: Additional Settings
Selecting capture mode “360° overview only @ 60/50 fps no WDR” on AXIS M3067-P and capture mode “360° overview only @ 30/25 fps no WDR” on AXIS M3068-P, there will be only Overview available. For the other capture modes see the tables below for supported views/resolutions. - Page 10 Which capture mode to choose depends on the requirements of frame rate and resolution for the specific surveillance setup. For specifications about available capture modes, see the product’s datasheet. To find the latest version of the datasheet, go to axis.com.
- Page 11 AXIS M30 Network Camera Series Additional settings • Set Max shutter to a shorter time, and Max gain to a higher value. If you still have problems with motion blur: • Increase the light level in the scene. • Mount the camera so that objects move toward it or away from it rather than sideways.
- Page 12 3. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest. Find out more about WDR and how to use it at axis.com/web-articles/wdr. Hide parts of the image with privacy masks You can create one or several privacy masks to hide parts of the image.
-
Page 13: View And Record Video
AXIS M30 Network Camera Series Additional settings 3. In the text field, type #x to show the pan position. Type #y to show the tilt position. 4. Choose appearance, text size, and alignment. 5. Include the text overlay. 6. The current pan and tilt positions show up in the live view image and in the recording. -
Page 14: Set Up Rules And Alerts
1. Go to Settings > System > Events and add a rule. 2. Type a name for the rule. 3. In the list of conditions, under Application, select AXIS Video Motion Detection (VMD). 4. In the list of actions, under Recordings, select Record video while the rule is active. - Page 15 AXIS M30 Network Camera Series Additional settings Send an email automatically if someone spray paints the lens 1. Go to Settings > System > Detectors. 2. Turn on Trigger on dark images. This will trigger an alarm if the lens is sprayed, covered, or rendered severely out of focus.
-
Page 16: Learn More
AXIS M30 Network Camera Series Learn more Learn more Cleaning recommendations NOTICE TICE TICE Never use harsh detergent, for example gasoline, benzene, or acetone. 1. Use a can of compressed air to remove any dust or loose dirt from the device. - Page 17 H.264 or MPEG-4 Part 10/AVC Note H.264 is a licensed technology. The Axis product includes one H.264 viewing client license. To install additional unlicensed copies of the client is prohibited. To purchase additional licenses, contact your Axis reseller. H.264 can, without compromising image quality, reduce the size of a digital video file by more than 80% compared to the Motion JPEG format and by as much as 50% compared to the MPEG-4 standard.
- Page 18 AXIS M30 Network Camera Series Learn more Maximum bitrate (MBR) With maximum bitrate, you can set a target bitrate to handle bitrate limitations in your system. You may see a decline in image quality or frame rate when the instantaneous bitrate is kept below the specified target bitrate. You can choose to either prioritize image quality or frame rate.
-
Page 19: Applications
Actual average bitrate Applications AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications. -
Page 20: Troubleshooting
Using firmware from the active track is recommended if you want to access the newest features, or if you use Axis end-to-end system offerings. The LTS tracks are recommended if you use third-party integrations, which are not continuously validated against the latest active track. -
Page 21: Upgrade The Firmware
Axis device. Check all cabling and reinstall the device. Possible IP address conflict The static IP address in the Axis device is used before the DHCP server sets a dynamic address. with another device on the... -
Page 22: Performance Considerations
IP addresses obtained from a DHCP server are dynamic and may change. If the IP address has been changed by DHCP changed, use AXIS IP Utility or AXIS Device Manager to locate the device on the network. Identify the device using its model or serial number, or by the DNS name (if the name has been configured). -
Page 23: Need More Help
Heavy network utilization due to poor infrastructure affects the bandwidth. • Viewing on poorly performing client computers lowers perceived performance and affects frame rate. • Running multiple AXIS Camera Application Platform (ACAP) applications simultaneously may affect the frame rate and the general performance. Need more help? Useful links •... -
Page 24: Specifications
AXIS M30 Network Camera Series Specifications Specifications To find the latest version of the product’s datasheet, go to the product page at axis.com and locate Support & Documentation. LED indicators Note The Status LED can be configured to flash while an event is active. - Page 25 User Manual Ver. M3.2 AXIS M30 Network Camera Series Date: March 2020 © Axis Communications AB, 2019 - 2020 Part No. T10140166...