Printing Transparencies From The Multi-Purpose Tray - Xerox PHASER Phaser 4400 Paper Manual

Printing transparencies from the Multi-Purpose Tray

1. Insert the transparencies into the Multi-Purpose Tray (maximum capacity is 100 sheets). For more
information, refer to the Trays section of the Trays and Paper Guide on the Interactive
Documentation CD-ROM.
Don't load transparencies above the indicated mark on the Multi-Purpose Tray.
I
2. When the front panel prompts you to confirm or change the paper type and size:
a. Press the Down Arrow key to scroll to
b.
Scroll to
Transparency
c. Scroll to
Change Paper Size
d.
Scroll to the correct transparency size and press the OK key to save your selection.
3.
In the printer driver, select Multi-Purpose Tray as the paper source and select Transparency as
the paper type.
Phaser™ 4400 Laser Printer
Change Paper Type
and press the OK key to save your selection.
, then press the OK key.
Specialty Printing
P4400-86
, then press the OK key.
26