Phaser 6300/6350 Pcl Commands; Media Size - Xerox Phaser 6300, 6350, 8500, 8550 Administrator's Manual

Phaser 6300/6350 PCL Commands

This section includes:
■

Media Size

on page B-2
Media Type on page B-3
■
■ Input Trays on page B-4
Media Size
The following table lists the PCL commands for the media sizes supported by the
Phaser 6300/6350 printer. For information on the corresponding trays supported, print the
Paper Tips page. See Paper Tips Page
Note: If you are using custom sizes in PCL commands, you need to load the paper into the
tray, set the type and size on the control panel, select the printing options in the printer driver,
and then send the job to the printer from the software application's Print dialog box.
Media Size
A4 (210 x 297 mm)
A5 (148 x 210 mm)
A6 (105 x 148 mm)
ISO-B5 (176 x 250 mm)
B5-JIS (182 x 257 mm)
Statement (5.5 x 8.5 in.)
Executive (7.25 x 10.5 in.)
Letter (8.5 x 11in.)
US Folio (8.5 x 13 in.)
Legal (8.5 x 14 in.)
A7 Envelope (5.25 x 7.25 in.)
B5 Envelope (175 x 250 mm)
#10 Commercial Envelope (4.12 x 9.5 in.)
Monarch Envelope (3.87 x 7.5 in.)
C5 Envelope (162 x 229 mm)
C6 Envelope (114 x 162 mm)
DL Envelope (110 x 220 mm)
Custom
* The character that follows the "&" in the command is the lowercase letter "L".
on page 5-6.
PCL 5 Command
<Esc>&l26A
<Esc>&l25A
<Esc>&l24A
<Esc>&l65A
<Esc>&l45A
<Esc>&l15A
<Esc>&l1A
<Esc>&l2A
<Esc>&l10A
<Esc>&l3A
<Esc>&l84A
<Esc>&l100A
<Esc>&l81A
<Esc>&l80A
<Esc>&l91A
<Esc>&l92A
<Esc>&l90A
<Esc>&l101A
System Administrator Guide
B-2
Phaser 6300/6350 PCL Commands
*