Washed Out Documents When Scanning/Copying; Manual Feed; Manual Feed Media Source Will Be Ignored When Used With The Accxes Client Tools' Page Composition Feature; Instant Access - Xerox FREEFLOW ACCXES FIRMWARE 12.7 B 114 Firmware Release Notes

6.5.9 Washed out documents when scanning/copying

When scanning/copying documents with very low contrast (like poor blue line or sepia documents)
with dynamic background removal set to OFF can cause the system to threshold the document
and produce a very washed out document. Enabling background removal will actually remove
less of the background in this case.

6.6 Manual Feed

6.6.1 Manual feed media source will be ignored when used with the
Accxes Client Tools' page composition feature.
Go to Accxes Client Tools > Job Option tab > Composition tab > Select Overlay Images > Media
Source drop down menu. Although "Manual Feed" is listed as a choice of media source for page
composition jobs, the print job will be treated as if AUTO media source was selected. If an
appropriate roll of media is available, it will be printed on that media; otherwise, the job will query
until the correct roll media is installed. In addition, other Media Source selections will be treated
as AUTO if an appropriate roll of media is available in a different roll.

6.7 Instant Access

6.7.1 InstantAccxes Folders not browse-able on IPv6

When using InstantAccxes folders on an IPv6 network you must reference the system directly as
shown below:
Vista: Start>Run> \\<Controller Name>
Linux: smb://<Controller Name>

6.7.2 InstantAccxes Folders not accessible from MAC on IPv6

InstantAccxes folders are not accessible to systems running MAC OS 10.4 or earlier versions on
IPv6 networks.

6.8 Web Print Manager Tool (WebPMT)

6.8.1 Printer Queue – Main WebPMT Screen
The FreeFlow Accxes Controller supports a maximum of 120 active printer jobs in the queue and
8 active copy jobs. If subsequent jobs are sent before the 128th prints, ports will refuse
connections and there can be scan errors; when there are fewer jobs in the queue, the jobs can
then be resubmitted or scanned. Additionally, completed jobs will be removed from the queue
display immediately to make room for the newly submitted print jobs. To avoid these issues, keep
the number of active print jobs to under the 128 limit.
NOTE: More than 128 files can be sent from the Document Submit Tool as one print job, but all of
the files in the print job must have printed before sending subsequent jobs, or the jobs will be
refused.
Page 13