Xerox DocuPrint N24 System Administrator Manual page 158

Novell Menu
Table 3.15 Novell Menu functions (continued)
Menu Item and Function
PServer Name
Set the name of the PServer in this
printer (a name of 2 to 47 characters in
length). The available values are:
A - Z, 0 - 9, hyphen (-),underscore (_)
XRX_<macaddress>*
For this item (after Step 3), Item
Up moves the cursor to the right
through the displayed PServer name
and Item Down moves the cursor
to the left. This allows you to change
characters within the string rather than
having to reenter the entire string.
With the cursor displayed under a
character, Value Up increments
the value of that character and Value
Down decrements the value.
From any cursor position, you
can null out (delete) to the end
of the string by selecting the
space character with Value
Up or Value Down
and then pressing Enter
3-80 DocuPrint N24, N32, and N40 System Administrator Guide
Keystrokes
1. Press Menu Up
Down until you see:
2. Press Item Up
Down until you see:
3. Press Value Up
Down . You will see:
4. Press Value Up
Down to change the value
of the character above the
cursor. The value is incremented
or decremented by 1 each time
the key is pressed. Holding
down Value Up
Down
causes continuous
scrolling through the values.
5. To change other characters in
the PServer name, press Item
Up or Item Down
scroll right or left respectively
through the character string,
then press Value Up
.
Value Down
value of the character above the
cursor (as in Step 4).
6. When you have completed
setting the PServer Name, press
Enter . You will see:
7. Press On Line
or Menu
Menu s
Nove ll Men u
or Item
Nove ll Men u
PSer ver Na me
or Value
PSer ver Na me
xxx...xxx
or Value
PSer ver Na me
xxx...xxx
or Value
PSer ver Na me
xxx...xxx
to
or
to change the
Nove ll Men u
PSer ver Na me
. You will see:
Read y
Table 3.15 Page 3 of 6
Display
=
=
=