Filling The Coffee Maker With Water For Brewing; Pause And Pour Feature - KitchenAid KXA42 Manual

OPERATING THE COFFEE MAKER

FILLING THE COFFEE MAKER WITH WATER FOR BREWING

TIP: Brew two pots of fresh, cool water and discard before brewing the first
pot of coffee�
Lift the water tank lid and fill
with enough fresh, cool water to
make the desired amount of coffee�
1
Use the cup indicators on the water
tank window to view water input�
Close the water tank lid�
NOTE: When using the Small Batch brew cycle, make sure to fill the tank with
only the amount of water needed to brew your desired number of cups� If you
put in 1,84 litres of water, the Coffee Maker will brew all 1,84 litres�

PAUSE AND POUR FEATURE

The Pause and pour feature enables you to remove the carafe from the Coffee Maker
and pour a cup of coffee before brewing is finished� When the carafe is removed,
a special valve stops the flow of coffee from the filter basket� However, brewing
does not stop� If the carafe is not placed back in the Coffee Maker within 25 seconds,
water and coffee grounds will overflow the filter basket�
12 | OPERATING THE COFFEE MAKER
W11032845A_EN_Final.indd 12
Place the carafe in the Coffee Maker�
Make sure the bottom of the carafe
is fully seated; otherwise, the Pause
2
and pour feature may not engage,
causing water and coffee to overflow
the filter basket�
2/17/17 2:37 PM