Xerox DocuColor 5000 Administrator's Manual page 104

3. P r o fi l e s
3- 4 6
14.
From the Tray Properties window, select the Decurler
Profile that you just created/edited (for example,
DecurlerProfile1).
15.
Select the pages from your original print job that represent
the extremes in curl.
16.
Enter a print quantity of 20-25 and print these pages.
17.
Retrieve your output and compare the paper curl condition
of the original stack with the paper curl of the new stack.
a. If the curl is eliminated in the new output stack,
continue printing the job and you are finished.
b. If the curl in the new stack is in the opposite direction from
the original paper output, you may have to adjust the
average toner coverage amount entered in the
Decurler Profile; repeat this procedure starting at Step 6.
c. If the curl is eliminated in one stack but not the other,
additional adjustments are required; proceed to the next
step.
D o c uC o lo r 50 0 0 A d mi n i s t r a t o r G ui d e