Volume Control - Minelab F3 Compact Operation Manual

Volume Control

The default volume level of the F3 Compact is close to maximum. However, volume
can be lowered or slightly increased using the volume control feature of the
F3 Compact.
Volume can be reduced from default in seven steps by pressing and releasing the
Noise Cancel button. To Initiate noise cancelling, the Noise Cancel button must be
held down for two seconds. Volume can be increased from default in one step by
pressing and releasing the LED On/Off button.
If the LEDs are switched On, and volume is changed, a temporary visual indication
of volume level is provided to the operator.
For each reduction in volume, a low pitched beep will be emitted. For each increase
in volume, a high pitched beep with be emitted. Whenever the default volume is re-
selected a double deep is emitted notifying the operator that default volume has
been selected
When the volume is adjusted to the extreme upper or lower setting a longer beep
is emitted alerting the operator that the maximum or minimum setting has been
reached.
Figure 11: Volume Control buttons
F3 Compact Operations Manual Functional Description | 17