Xerox Printer/Fax/Scanner/Copier WC5230 Setup Manual page 13

Quick scan features
Table of Contents

Advertisement

Procedure for Setup of Scan to PC
To use Scan to PC (FTP/SMB) you need to enable the applicable Ports (SMB or FTP client)
on the machine, and make sure that an IP address has been set on the machine.
Note
The configuration can also be performed using CentreWare Internet Services. For
information on how to use CentreWare Internet Services, refer to the CentreWare
Internet Services section of the System Administration Guide.
1.
Display the [System Administrator Menu] screen.
a.
Press the <Log In/Out> button.
b.
Enter the login ID ("11111") using the numeric keypad or the keyboard displayed
on the screen, then select [Confirm].
c.
Press the <Machine Status> button on the control panel.
d.
Select the [Tools] tab.
2.
When using the [SMB] protocol, enable the [SMB] port.
a.
Select [System Settings].
b.
Select [Connectivity & Network Setup].
c.
Select [Port Settings].
d.
Select [SMB] and then select [Change Settings].
e.
Select [Port Status] and then select [Change Settings].
f.
Select [Enabled] and then select [Save].
g.
Select [Close] until the [Port Settings] screen is displayed.
3.
When using the [FTP] protocol, enable the [FTP] client port.
a.
Select [System Settings].
b.
Select [Connectivity & Network Setup].
c.
Select [Port Settings].
d.
From the [Port Settings] screen, select [FTP Client] and then select [Change
Settings].
e.
Select [Port Status] and then select [Change Settings].
f.
Select [Enabled] then select [Save].
g.
Select [Close] repeatedly until the [Tools] tab screen is displayed.
4.
Wait several seconds for the Auto Clear service to log you out.
5.
If you changed any settings, the machine will automatically reboot to register and
enable your new settings. After the machine is restarted, print out a Configuration
Report to confirm that the ports are enabled and TCP/IP is correctly configured.
If remote authentication has been enabled, a separate login screen appears when the Scan to
PC feature is selected. Documents are not scanned in unless the remote authentication server
authenticates user access.
13
Scan to PC Setup

Advertisement

Table of Contents
loading

Table of Contents