Analog I/O Modules; Standard Analog Modules - Hitachi EHV+ Series Applications Manual

Chapter 2 Specifications
2.8

Analog I/O Modules

2.8.1 Standard analog modules

Module features
Terminal block
Item
The terminal block is to connect I/O signals. It is removable type. M3 screws are used.
Terminal block
Use a crimping terminal fitting with screw diameter.
The maximum size of the cable is 0.75 mm
terminal.)
The recommended crimping terminal is indicated as below.
Terminal block cover This is a covert for installing on the terminal block.
Terminal
block cover
Description
2
. (Use 0.5 mm
6 (0.24)
(Recommended)
Handle very carefully
6 (0.24)
since cable could be
detached
Unit: mm (in.)
when screw is loose.
2 – 48
EH-AX44
(Approx. 0.18kg (0.41lb.))
EH-AX8V, AX8H
(Approx. 0.18kg (0.41lb.))
EH-AX8I, AX8IO
(Approx. 0.18kg (0.41lb.))
EH-AY22
Type (Weight)
(Approx. 0.18kg (0.41lb.))
EH-AY2H
(Approx. 0.18kg (0.41lb.))
EH-AY4V, AY4H
(Approx. 0.18kg (0.41lb.))
EH-AY4I
(Approx. 0.18kg (0.41lb))
Dimensions
(mm (in.))
30 (1.18)
2
cable if using 2 crimping terminals in single
6.4
M3 screw
95 (3.74)
7.6
8.2
Unit: in.