Connecting To A Computer - Samson Go Mic Owner's Manual

Connecting to a Computer

Using the Go Mic with Windows Computers
1. From the Start Menu, open the Control Panel and select Sound. Under the Playback
and Recording tabs, select the Samson Go Mic as the audio device.
2. To adjust the gain of the microphone, click the Properties button, and then select
the Levels tab. You can view the volume level as either a percentage or in dB, by
right clicking on the number box.
3.
If the microphone LED is lighting red, turn this control down until the LED no longer
flashes red.
4. In the Playback tab, select the Level tab and set the computer's Master Volume to
100%. Use the Go Mic's Output Level buttons to control the overall output from the
headphones or speaker.
5. To adjust the direct monitoring level in the Playback tab by moving the fader labeled
Microphone.
Using the Go Mic with Apple OSX
1. Open System Preferences from the dock or the main Apple Menu.
2. Select the Sound preference icon, choose the Input tab and select Go Mic.
3. Set the gain of the Go Mic by adjusting the Input volume slider at the bottom of the
Sound dialog box.
4. Set the Go Mic as playback volume by clicking the Output tab and select Go Mic, ad-
just the Output volume slider at the bottom of the Sound dialog box to the maximum
setting and use the Go Mic's front panel Volume knob to control the overall output
from the headphones or speakers.
5. To turn direct monitoring on or off, open the Audio/MIDI Setup utility located in the
Utility folder inside the Applications folder. Then click the check-box in the Thru
column in Audio/MIDI Setup.