Raymarine HYPERVISION HV-100 Installation Instructions Manual page 21

Note: The illustration above provides potential transducer locations for the hull types depicted.
Before selecting a location ensure that all of the location requirements have been met.
• The transducer should be mounted a minimum of 380 mm (15 in) away from the propeller. For
clockwise rotating propellers, mount the transducer on the starboard side, for counter-clockwise,
mount on the port side. On a twin engine vessel mount the transducer close to the centerline or
just offset from the centerline.
• The mounting location must ensure that the transducer element remains submerged when
planing and turning.
Installation 21