Setting A Timer; Setting An Alarm - Huawei HONOR Band 5i User Manual

HONOR Band 5i
User Guide
1.
2.
3.

2.7 Setting a Timer

To use the Timer on your band, perform the following steps:
1.
2.
3.
4.
5.

2.8 Setting an alarm

You can use the Huawei Health app to set a Smart alarm or an Event alarm for a connected
band.
l
Issue 01 (2019-10-23)
Touch More and then select Stopwatch.
Touch to start timing. The stopwatch can count up to "59:59.9". Once it hits
that number it will stop on its own.
While Stopwatch is running, you are able to:
– Touch
– Touch
– Touch
– Swipe right to return to More screen without stopping timing.
To use this function, go to More > Timer on your band screen.
Setting the Timer
– When using the Timer function for the first time, access the Timer settings screen of
your band, and set the hours, minutes, and seconds. The value range for hours is
0–11, while that of minutes and seconds is 0–59.
– If you have used the Timer function before, open the Timer screen you accessed last
time and touch
Touch to start the Timer.
Touch to pause the timing, and touch
Your band will vibrate and its screen will switch on to notify you when the set time has
been reached. Swipe right on the screen or touch
Perform no operations and Timer will automatically close after 1 minute.
When Timer is enabled, the on-going timing screen will display when you return to it again from the
home screen.
A Smart alarm, has two conditions to go off, it needs to be around when the time it was
set for and you need to be in light sleep. This type of alarm helps your body gradually
adjust to waking up and helps you wake up feeling more refreshed.
Copyright © Huawei Technologies Co., Ltd.
to stop timing.
to resume timing.
to end timing and reset the stopwatch to "00:00.0".
, and set the hours, minutes, and seconds.
2 App management
to end it.
to turn off the Timer.
19