Remote Photo Shooting; Using Stopwatch - Huawei HONOR Band 5i User Manual

HONOR Band 5i
User Guide
If you do not perform any operation during an incoming call, your band will display a
message to notify you of the missed call. Swipe right on the home screen to clear the message.

2.5 Remote photo shooting

1.
2.

2.6 Using Stopwatch

To use the Stopwatch function on your band, do the following steps:
Issue 01 (2019-10-23)
l The band screen will remain on when notifying you of an incoming call.
l Your band can mark an unknown number. This feature is available only when the band is paired with
a phone running EMUI 4.0 or later.
l Your band will vibrate and turn on its screen to notify you of any incoming calls during a workout.
l When pairing your band with an Android phone, touch the band screen or the Home key to return to
the home screen and ignore incoming calls. Muting calls is only supported on iOS. To use this
feature, touch your band screen or the Home key. Your band will display a muting screen and then
the home screen after two seconds. Proceed to mute the call.
This feature is only available on Huawei phones running EMUI 8.1 or later.
After connecting your band to your phone, open Camera on your phone, and your band
screen will turn on and display the camera icon shown below.
Touch the camera icon on the band screen to take photos on your phone. The band will
return to the camera shutter screen two seconds after taking a photo.
1. The band screen will automatically turn off if no operation is performed on the camera shutter
screen for five seconds.
2. From the camera shutter screen, touch the Home key to return to the home screen, or swipe
right on the band screen to go back to the previous screen.
3. To exit the camera shutter screen on your band, close the Camera app on your phone or
disconnect your phone from the band.
Copyright © Huawei Technologies Co., Ltd.
2 App management
18