Table of Contents
Advertisement
Bandsaw Body
The bandsaw body rep-
resents a heavy load.
Seek assistance before
beginning this step.
1. Seek assistance and place the bandsaw body
next to the stand. Rotate the bandsaw body
so the access door on the bandsaw body is
facing the same way as the cabinet door.
2. For safety, remove the bandsaw blade. To
do this, open the upper and lower doors on
the bandsaw body. Lift the tensioning han-
dle up and carefully remove blade. See
Figure 12. If the blade is hard to remove
with the tensioning handle up, rotate the
handle counterclockwise to release the
pressure. See Blade Changes section for
more details.
3. Lift the bandsaw body with the help of an
assistant. The foot of the bandsaw body will
fit into the pocket in the top of the stand.
Do Not lift from the foot
of bandsaw body. Your
fingers would be at risk
of a pinch injury should
the bandsaw be placed
in this way.
4. Secure the bandsaw body as in Figure 13
3
with the (4)
⁄
"-16 x 2" carriage bolts,
8
hex nut and flat washers provided.
Figure 12. Lifting tensioning handle.
Figure 13. Securing bandsaw body.
3
⁄
"
8
12
Advertisement
Table of Contents
