Connecting Digital Audio Devices; Connecting Your Cable/Satellite Box, Tv, And Vcr To The Media Center - Bose 3-2-1 Series II Owner's Manual

Bose owner's guide dvd home entertainment systems 321 series ii, 321gs series ii
Hide thumbs Also See for 3-2-1 Series II:
Table of Contents

Advertisement

S
S
YSTEM
ETUP
Figure 16
Media center digital audio
input jacks
20
Svenska

Connecting digital audio devices

Some audio devices may feature a digital audio output for optimum sound performance. Use
an optical digital cable or a coaxial digital cable, as appropriate, to connect this output to the
digital input on the media center. You can purchase the required cables at a local electronics
store.
On the media center rear panel, an optical digital cable connects to the OPTICAL jack. A
coaxial cable connects to the audio input jacks labeled D.
Note: Before you can benefit from the optical connection, you will need to assign the optical
connector to the audio source in the system settings menu. See "Media center options" on
page 49.
Optical digital
audio input

Connecting your cable/satellite box, TV, and VCR to the media center

The 3•2•1 home entertainment system provides flexibility for you to add up to three external
audio devices, including your TV, directly to the media center.
Figure 17 shows you an advanced setup using a TV, VCR and cable/satellite box. In this
setup, please notice the following:
• S-video connections are used to deliver the cable/satellite signal to the media center.
Therefore, the media center output video is sent to the TV also through an S-video
connection.
• Analog and digital coax audio connections are shown for the cable/satellite box. As an
option, you may use an optical digital connection. However, before you can benefit from the
optical connection, you will need to assign the optical connector to the cable/satellite box
audio source in the system settings menu. See "Media center options" on page 49.
• When connecting an audio device to the media center jacks, remember to match the red
jack to the right channel (R) and the white (or black) jack to the left channel (L).
• For further details on making the video connections between your VCR and TV, refer to the
manuals for these video devices.
Note: The recommendations contained in this owner's guide are basic suggestions for connect-
ing external devices to the 3•2•1 Series II system. Instructions and terminology pertinent to these
external devices may vary, depending on the manufacturer. Consult the owner's guide that came
with the device for clarification on setup and usage before making any connections.
Nederlands
Français
Italiano
Coaxial digital
audio inputs
Deutsch
Español
English
Dansk

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

321gs series ii3-2-1 gs series ii321gs ii series321 ii series

Table of Contents