7.
Appendix
7.1
Conversion Of Numerical Values
PG9000 performs all internal calculations in SI units. Numerical values input or output in other units are
converted to SI immediately after entry and back to other units just before output as needed.
Table 26 provides the conversion coefficients used by PG9000 to convert numerical values expressed in
SI units to corresponding values expressed in other units.
7.1.1
Pressure
Pa
mbar
kPa
bar
mmWa @ 4°C
mmHg @ 0°C
psi
psf
inWa @ 4°C
inWa @ 20°C
inWa @ 60°F
inHg @ 0°C
2
kcm
Torr
mTor
user
Table 26. Pressure Unit of Measure Conversions
To convert from Pa to
Pascal
millibar
kilo Pascal
Bar
millimeter of water
millimeter of mercury
pound per square inch
pound per square foot
inch of water
inch of water
inch of water
inch of mercury
kilogram force per centimeter square
Torr (mmHg @ 0°C)
milli Torr (micron Hg @ 0°C)
User
Page 183
Multiply by
1.0
1.0 E-02
1.0 E-03
1.0 E-05
1.019716 E-01
7.50063 E-03
1.450377 E-04
0.0208854
4.014649 E-03
4.021732 E-03
4.018429 E-03
2.953 E-04
1.019716 E-05
7.50063 E-03
7.50063
User defined coefficient
© 1998-2010 Fluke Calibration