Advertisement
The Roll to Roll system specifically designed for Epson C6500P color label printer can handle
rolls up to 220mm (8.66") media wide and having an outside diameter up to 250mm (10"). Both
Unwinder and Rewinder are equipped with a fixed 3" core holder. An external power supply
100/240VAC - 2.5A
speed and sense of rotation auto adjustment.
LABEL UNWINDER INSTALLATION
at 24V allows an electronic circuit to provide, through the tension arm, the
If you do not have the printer
plate (JPL-6500P), place and
align the unwinder behind the
printer and than follow the
instructions from STEP 3.
STEP 1
Place carefully the printer into the lock guides.
STEP 2
On the back side, place and screw the
unwinder to the printer plate.
Do not tighten the knobs until the unwinder will
be properly aligned to the printer.
STEP 3
Remove the additional support and the outer
disk.
Now Load both roll of media and outer disk
onto the core holder.
Advertisement
