Table of Contents
Advertisement
2.3.3
DEVICE MANAGEMENT
In this section there are four parts:
1. Detection Management
I.
Identification Settings: select 1:N or Disable to enable/disable the facial recognition
feature
In the factory default setting, the facial recognition feature is enabled (1:N selected)
II.
Temperature detection Setting: normally select Indoor and Enable to enable
temperature detection.
Select "Prohibited Abnormal Temperature" to prohibit access to persons with an
abnormal temperature.
Select the favorite temperature unit (Celsius or Fahreneit) and set the Normal
temperature range.
In the factory default setting, the Prohibited Abnormal Temperature feature is enabled
and the default normal temperature value is 35°-37.3° C, (i.e. the abnormal temperature
starts from 37.4° C)
III.
Mask Detection Settings: select "Enable" and "Prohibited No Mask" to enable the
mask wearing control and prohibit access to a person who isn't wearing the mask .
In the factory default setting, the mask wearing control feature is disabled.
IV.
Live detection: Select to recognize real human face only. This option prevents fake
image from picture or mobile screen
FL X1 User Manual
17
Advertisement
Table of Contents
