7.2.2 (e)
Repeater
Diagram: Shows the dependency of the Wi-Fi signal for each camera connected.
What is shown in the above diagram is CH1, CH2, CH3, CH6 and CH7 connected
directly to the NVR, CH4 connected in Daisy Chain to CH3 where CH3 works also
as a repeater and CH5 connected in Daisy Chain to CH4 where CH4 works also as
a repeater. The CH8 is disconnected.
Table: Shows the signal strength off each connected camera.
Refresh: Will update the diagram with any changes made.
Apply: Will apply any changes made.
7.2.3
On Screen Display
Camera: Allows you to select which camera to modify.
Camera Name: Shows the current name and allows you to edit the name of the
selected camera.
Image Settings: Allows to modify video image settings for the selected camera.
54
WNVR Series
User's Manual