6.3.3
Login/Forgot Password
Anytime you want to configure or adjust your system settings you will be required to
log in by entering your username and password. It's important you save your login
information or you won't be able to access your NVR. We strongly recommend that
you store your password on page 7 of your QSG.
Username: Admin (all lowercase) is the default username. If additional were
created, you can switch between them.
Password: Enter the password you created during the Startup Wizard.
Forgot Password: Sends a secure code to your recovery email address. Once you
input the secure code, your NVR will restart and you will be required to create a
new password.
If you select Forgot Password, you will be directed to this screen. Simply enter the
secure code that was emailed to your recovery email address and then select OK.
Your NVR will then be restarted and you will be required to create a new password.
40
WNVR Series
User's Manual