Alcatel MY FLIP 2 User Manual page 9

Charging the battery
Insert the small end of the charging cable into the charge port and connect the charger to a power outlet.
To reduce power consumption and energy waste, when the battery is fully charged, disconnect your charger;
switch off Wi-Fi, GPS or Bluetooth when not in use; reduce the backlight time, etc.
To optimize your battery life, you may do the following:
• Turn on power saving mode: From the Home screen, press the Center Soft Key
Battery > Power Saving Mode > On.
• Lower screen brightness: From the Home screen, press the Center Soft Key
> Display > Brightness. Lower the brightness by pressing the left and right of the Navigation Key.
• Screen timeout: From the Home screen, press the Center Soft Key
> Screen timeout > 30 seconds.
1�2�2 Power on your phone
Press and hold the End/Power Key
Setup your phone for the first time
The first time you power on the phone, you will be guided through the following steps:
Select the phone's language, then press the Right Soft Key
•
Select the phone's Keyboard, then press the Right Soft Key
•
• Select an available Wi-Fi network, then press the Right Soft Key
Learn more about Anti-Theft and then press the Center Soft Key
•
• Select Scheduled Install, then press the Right Soft Key
Read the KaiOS Terms and Privacy Policy, press the Center Soft Key
•
Navigation Key and the Center Soft Key
Read and press the Right Soft Key
•
• Finally press the Center Soft Key
until the phone powers on.
to go to the next step.
to set options, then press the Right Soft Key
to go to the next step.
to enter the Home screen.
8
> Settings
> Settings
> Settings > Personalization > Display
to go to the next step.
to go to the next step.
to go to the next step.
to go to the next step.
to learn more and/or open URL; Use the
> Device >
> Personalization
to go to the next step.