Vox VH-Q1 Quick Start Manual page 9

Charging and turning on/off
Connecting the charging cable
■
● Charge this unit before the first use.
● When the battery level becomes low, the voice guide sounds "Battery level
empty" to indicate that the battery level is low, and the power indicator
lights up or flashes in red. When the voice guide sounds, charge this unit.
● The time required to fully charge this unit is 3.5 to 6 hours (depending on
operating conditions).
USB Type-A
1. Plug the Micro USB connector of the included charging cable into the Micro
USB port on this unit.
• When connecting the charging cable, check the orientation of the connector and
insert it straight in.
• The included charging cable is for this unit only. Do not use it for any purpose other
than charging this unit.
2. Plug the USB Type-A connector of the included charging cable into the port
on your computer.
• The indicator on the unit lights up in red, and charging starts.
• While charging, the unit cannot be turned on/off or operated.
• When charging is complete, the charging indicator goes off.
Micro USB
Turning on the unit
■
Hold down the power button ( ) for
approximately two seconds.
• The unit turns on, and the power indicator shows
the status of the unit.
Not lit: Off
Lit in blue*: On
Flashing in blue*: Waiting for Bluetooth connection
Flashes in blue twice*: Establishing a Bluetooth
connection
Flashing alternately in blue and red: Bluetooth
pairing mode
* Changes to red when the battery level is low.
Turning off the unit
■
While the unit is on, hold down the power button (
seconds.
• The unit turns off, and the power indicator goes off.
Power button
Power indicator
En
) for approximately two
VH-Q1 SILENT SESSION STUDIO 9