Daikin CTKS25TVMG Operation Manual page 30

Multi Connection
Note for Multi System
„ Priority room setting
The priority room setting requires initial programming during installation. Please consult your authorized dealer for assistance.
The room designated as the priority room takes priority in the following situations.
Operation mode priority
• As the operation mode of the priority room takes precedence, you can select a different operation mode from other
rooms.
[Example]
• Room A is the priority room in this example.
When COOL operation is selected in room A while operating the following modes in room B, C and D:
Operation mode in room B, C and D
COOL or DRY or FAN
Priority when POWERFUL operation is used
[Example]
• Room A is the priority room in this example.
The indoor units in rooms A, B, C and D are all operating. If the unit in room A enters POWERFUL operation, operation
capacity will be concentrated in room A. In such a case, the cooling efficiency of the units in room B, C and D may be
slightly reduced.
Priority when OUTDOOR UNIT QUIET operation is used
[Example]
• Room A is the priority room in this example.
Just by setting the unit in room A to QUIET operation, the air conditioner starts OUTDOOR UNIT QUIET operation.
You do not have to set all the indoor units in operation to OUTDOOR UNIT QUIET operation.
29
Status of room B, C and D when the unit in room A is in COOL operation
The current operation mode is maintained.