Certification - Hach CL17 Instrument Manual

Certification

Product Safety
Immunity
Emissions
54400_cert.fm
Hach Company certifies this instrument was tested thoroughly, inspected, and
found to meet its published specifications when it was shipped from the
factory. The CL17 Chlorine Analyzer has been tested and is certified as
indicated to the following instrumentation standards:
The CL17 Chlorine Analyzer was tested for safety as follows:
UL 3101-1 (ETL Listing # H0492805390)
CSA C22.2 No. 1010.1 (ETLc Certification # H0492805390)
Certified by Hach to EN 61010-1 (IEC1010-1) per 73/23/EEC, supporting test
records by Intertek Testing Services.
The CL17 Chlorine Analyzer was tested for Industrial level EMC per:
EN 61326:1998 (EMC Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use) per 89/336/EEC EMC:
Supporting test records by Hach Company, certified compliance by
Hach Company.
Standards include:
IEC 1000-4-2:1995 (EN 61000-4-2:1995) Electro-Static Discharge Immunity
(Criteria B)
IEC 1000-4-3:1995 (EN 61000-4-3:1996) Radiated RF Electro-Magnetic Field
Immunity (Criteria A)
IEC 1000-4-4:1995 (EN 61000-4-4:1995) Electrical Fast Transients/Burst
(Criteria B)
IEC 1000-4-5:1995 (EN 61000-4-5:1995) Surge (Criteria B)
IEC 1000-4-6:1996 (EN 61000-4-6:1996) Conducted Disturbances Induced by RF
Fields (Criteria A)
IEC 1000-4-11:1994 (EN 61000-4-11:1994) Voltage Dip/Short Interruptions
(Criteria B)
Additional immunity Standard/s include:
ENV 50204:1996 Radiated Electro-Magnetic Field from Digital Telephones
(Criteria A)
The CL17 Chlorine Analyzer was tested for Radio Frequency Emissions
as follows:
Per 89/336/EEC EMC: EN 61326:1998
control and laboratory use—EMC requirements) Class "A" emission limits.
Supporting test records by Hewlett Packard, Fort Collins, Colorado Hardware Test
Center (A2LA # 0905-01) and certified compliance by Hach Company.
Standards include:
EN 61000-3-2 Harmonic Disturbances Caused by Electrical Equipment
(Electrical Equipment for measurement,
Certification
Page 71