Sony KDL-22PX300 Manual page 21

BENVDBPRTV - 12/15/2020 12:22 PM
SEC.2 SERVICE PANEL
SEC.2 SERVICE PANEL
2-1. Steps After Replacing the LCD Panel
Note: Before operation, disconnect all cables connected to the set.
1. Replace the LCD Panel.
2. Specify the following from the Service menu:
a. Specify PRETEND_ID of DL in PEM.
3. By using the USB memory, upgrade Software.
4. After turning off and on the power, confirm the Software Version from the Service menu.
5. Reset the Panel Operation Time from the Service menu.
6. Conclude the operation.
21
AZ1 VERSIONUP PROCEDURE(EU)