Thermostat Quick Reference - White Rodgers 1F95-1271 Installation And Operating Instructions Manual

THERMOSTAT QUICK REFERENCE

Home Screen Description
System button for selecting
Heat/Off/Cool or Auto (Heat/Cool)
Fan (Auto/On)
Programming and Configuration Items
Displays and "Keypad Lockout" when in keypad
1
lockout mode.
Displays and "Temperature Limit" and "Keypad
Lockout" when limited range is activated and locked.
Displays only "Temperature Limit" when limited range
is activated.
Indicates period of day being programmed.
2
RUN SCHEDULE (run program) button.
3
SET TIME button or HOLD temperature button.
4
Displays "Change Filter" when the system has run
5
for the programmed filter time period as a reminder
to change or clean your filter. Displays "Humidifier
Pad" when the system has run for the programmed
filter time period as a reminder to change or clean your
humidifier pad.
6 COPY button or INSTALLER CONFIG button.
CLEAN DISPLAY button allows 30 seconds to wipe off
7
the display or ADVANCE DAY button for programming.
Used in programming to set time and in configuration
8
menu to change selections.
"Hold Until" indicates the time when a temporary hold
9
period will end.
"Hours" and "Days" displays during steps in installer
10
configuration.
Figure 2 – Home Screen Display
Time and Day
Stage 1
Indicates when thermostat is
calling for Heat or Cool
Room Temperature and Setting Temperature
(flashes when compressor is in 5 minute lockout)
Temperature Up/Down
Displays
level of the 2 "AA" batteries. When the batteries
become low, "Change" will appear with the
The batteries should be replaced at this time.
Menu for Cleaning, Programming
and Setting Time
Figure 3 – Programming & Configuration Items
9
8
7
The words "Hold At" are displayed when the thermo-
11
stat is in the HOLD mode. "Temporary Hold At" is
displayed when the thermostat is in a temporary HOLD
mode.
12 "Call For Service" indicates a fault in the heating/
cooling system. It does not indicate a fault in the
thermostat.
"Stage 1" indicates when heating or cooling stage is
13
energized. "+2" also indicates when a second stage is
energized.
"Copy" indicates the copy program feature is being
14
used during programming.
indicating the current power
11
10
14
13
12
5
4
6
.
1
2
3
3