Stopping The Trimmer; Charging The Battery Pack - Toro 51484 Operator's Manual

1. Lock switch

Stopping the Trimmer

To stop the trimmer, release the trigger.

Charging the Battery Pack

Important:
For best results, charge your battery tool
where the temperature is more than 0°C (32°F) but less than
40°C (104°F). To reduce the risk of serious personal injury, do
not store it outside or in vehicles. Charging time will increase
if you do not charge it within this range.
1. Turn the battery pack upside down and line up the battery
terminal with the slot in the charger
Figure 7
2. Trigger
(Figure 8 and Figure
g016189
1. LED indicators
9).
1. LED indicators (level of
charge)
2. Release button
2. Slide the battery pack into the charger until it clicks into
place.
3. To remove the battery pack, press down on the release
button and slide the battery pack backward out of the
charger.
8
Figure 8
2. Insert the battery pack
here.
Figure 9
3. Battery terminal
g019895
g016223