Operation; Connecting To A Power Source; Starting The Trimmer; Stopping The Trimmer - Toro 51480A Operator's Manual

Operation

Connecting to a Power
Source
WARNING
If you do not fully seat the extension cord on the inlet
plug, the loose plug could lead to overheating and
cause a fire, possibly burning you or others.
Ensure that you fully seat the cord on the plug and use
the cord lock feature to secure the cord.
NOTICE! Do not use a damaged cord.
Note:
This appliance has a polarized plug (one blade is wider
than the other) and only fits into a polarized outlet or polarized
extension cord one way.
Tie together 2 connections so that the cords do not become
unplugged as shown in Figure 6.
Figure 6

Starting the Trimmer

To start the trimmer, slide the lock switch back to the O
then squeeze the trigger
1. Lock switch

Stopping the Trimmer

To stop the trimmer, release the trigger.
g343814
8
(Figure 7).
Figure 7
2. Trigger
position,
N
g015658