NETGEAR WAC540 Mount Manual page 2

Mount the Access Point on a Wall
1. Place the mounting plate on the wall.
2. Mark the wall where the mounting holes are.
3. Use the wall anchors and screws to attach
the mounting plate to the wall.
4. Attach the access point to the mounting
plate.
5. Twist the access point clockwise to lock it onto the mounting plate.
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
December 2018
trademarks are used for reference purposes only.
Support
Thank you for purchasing this NETGEAR product. You can visit
www.netgear.com/support
to register your product, get help, access the latest
downloads and user manuals, and join our community. We recommend that you
use only official NETGEAR support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian
French at https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of
Conformity, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
Do not use this device outdoors. If you connect cables or devices that are
https://kb.netgear.com/000057103
outdoors to this device, see
warranty information.
NETGEAR, Inc. NETGEAR INTL LTD
350 East Plumeria Drive Building 3, University Technology Centre
San Jose, CA 95134, USA Curraheen Road, Cork, Ireland
for safety and