Table of Contents
Advertisement
1780
10/4/00
9:26 AM
Page 15
OPERATION
City/City 1/City 2 Mode
Whistler's Three Stage City Mode is designed to reduce the
annoyance of automatic door openers, intrusion alarms and
other devices which share frequencies with police radar.
• Press City to engage City. Display reads:
CITY
• Pressing City a second time engages City 1. Display reads:
CITY 1
• Pressing City a third time engages City 2. Display reads:
CITY 2
• Pressing City a fourth time cancels City, City 1, and City 2.
Display reads:
HIGHWAY
In City Mode, weak speed/safety radar signals give an initial
alarm of two beeps, and then remains quiet unless the signal
becomes very strong. When the signal strength increases,
two additional beeps are provided. In City 1 Mode, only the
X band sensitivity is lowered. In City 2 Mode, X-band is not
detected. CAUTION: When selecting this mode, some
towns/small cities may still be using X band radar.
If Auto Quiet is engaged in City 1 or City 2 modes and the
unit receives a strong radar signal, the unit performs the Auto
Quiet feature. City Modes do not change the audio alert for
laser or VG-2.
12
OPERATION
Dim/Dark Mode
Dim/Dark Mode reduces the illumination of the display.
• Press and hold
(Power) for 2 seconds to reduce illumi-
nation to a Dim setting. Display reads:
DIM
• Pressing and holding
for 2 seconds a second time
engages Dark Mode. Display reads:
DARK
Dim or dark can be engaged during an alert. In Dark Mode,
the display goes dark for as long as a signal is being detect-
ed and for 20 seconds after, then the display returns to the
dimmer setting.
• Pressing and holding
a third time restores full illumina-
tion to the display.
Engaging/Disengaging VG-2
See option select mode to turn this feature on.
13
Advertisement
Table of Contents
