Vehicle Battery Saver Mode; Radar Alerts; Pulse Protection - Whistler 1670LD Owner's Manual

Laser/radar detector

Table of Contents

1670LD manual 4/11/02 11:48 AM Page 21

OPERATION

To exit Memo mode:

• Press

(Volume Up) or

taneously and release. The unit will beep twice.

NOTE: Memo mode automatically exits within 20 seconds

if a button is not pressed.

Vehicle Battery Saver Mode

The Vehicle Battery Saver Mode automatically shuts off

your detector within 6 hours if you forget to turn it off. The

timer is reset if the detector is turned off, unplugged or

any button is pressed before the 6 hours have expired. The

detector will alert you with an audible and visual warning

before it shuts off. Display shows:

During this warning you can momentarily reset the unit by

pressing any button. This will reset the timer.

If the unit has automatically turned itself off, press the

(Power/Play) button to turn the unit back on. You can

manually engage the Vehicle Battery Saver Mode by press-

ing and holding the City button until one beep is heard.

(Volume Down) buttons simul-

Blinking

Speed Radar Audio/Visual Alerts

When X, K or Ka is detected the band ID and signal

strength is displayed. The audio alert is continuous and

has a geiger counter-like pattern. The faster the beep the

closer or stronger the radar source. Example:

I = weak signal, III = strong signal

When a pulse type signal (instant on strong signal) is

detected an urgent 3 second audio warning is sounded

and the display shows:

After 3 seconds standard alert pattern continues.

Blinking

Table of Contents