Vehicle Battery Saver Mode - Whistler 1660 Series Owner's Manual

OPERATION
Engaging VG-2
To engage or disengage VG-2 Detection:
• Press and hold Dark for two seconds. Display reads:
VG2 ON
• Press and hold Dark a second time disengages VG2.
Display reads:
VG2 OFF
VG-2 must be engaged each time your detector is turned
on.

Vehicle Battery Saver Mode

The Vehicle Battery Saver Mode automatically shuts off your
detector within 3 hours if you forget to turn it off. The timer
is reset if the detector is turned off, unplugged or any button
is pressed before the 3 hours have expired. The detector will
alert you with an audible and visual warning before it shuts
off. Display reads:
PWR OFF
During this warning you can momentarily reset the unit by
pressing any button. This will reset the timer.
If the unit has automatically turned itself off, press any but-
ton to turn the unit back on. You can manually engage the
Vehicle Battery Saver Mode by pressing and holding the City
button until one beep is heard. The auto shutoff function will
initiate after several seconds.
12