Setting The Water Hardness Level - Miele PG 8061 Operating Instructions Manual
Commercial dishwasher
Hide thumbs
Also See for PG 8061:
- Installations plan (8 pages) ,
- Operating instructions manual (120 pages)
Table of Contents
Advertisement
Filling the salt container
28
Setting the water hardness level
The water softener can be set to between 0 and 73 gpg (0 - 70 °dH
German scale).
Select the
Additional settings
Water hardness
Select
Water hardness
°dH
19
(0 - 70 °dH)
The factory default setting for the water softener is a hardness of 20
gpg (19°dH German scale).
Please observe the table below when setting the hardness level.
If the water hardness fluctuates, e.g. between 8 and 18 gpg (8 and 17
°dH German scale), always be sure to set the dishwasher to the
higher value, 18 gpg (17 °dH German scale) in this example.
Use the arrow buttons (higher) and (lower) to set the required
water hardness level, and confirm your entry with the OK button.
menu.
and confirm your choice with the OK button.
Advertisement
Table of Contents
