Whirlpool WHAB-6012 Installation Instructions And Use And Care Manual page 17

PERFORMANCE DATA SHEETS
Water Filtration System,
Replacement Filter C
VOLATILE ORGANIC CHEMICALS/VOC's (continued)
Substance
1,1,2,2-tetrachloroethane
Tetrachloroethylene
Toluene
2,4,5-TP (silvex)
Tribromoacetic acid
1,2,4-Trichlorobenzene
1,1,1-Trichloroethane
1,1,2-Trichloroethane
Trichloroethelyne
Trihalomethanes (includes):
Chloroform (surrogate chemical) 0.300
Bromoform
Bromodichloromethane
Chlorodibromomethane
Xylenes (total)
Notes:
1. These harmonized values were agreed upon by representatives of USEPA and Health Canada for the
purpose of evaluating products to the requirements of ANSI/NSF Standard 53.
2. Influent challenge levels are average influent concentrations determined in surrogate qualification testing.
3. Maximum permissible product water concentration was not observed but was set at the detection limit
of the analysis.
4. Maximum permissible product water concentration is set at a value determined in surrogate
qualification testing.
5. Maximum permissible product water level calculated at chloroform 95% breakthrough point as
determined in surrogate qualification testing.
6. The surrogate test results for heptachlor epoxide demonstrated a 98% reduction. These data were
used to calculate an upper occurrence concentration, which would produce a maximum product water
level at the MCL.
For purchases made in Iowa:
This form must be signed and dated buy the buyer and seller prior to consummation of this sale.
This form should be retained on file by the seller for a minimum of two years.
BUYER:
Name ________________________________________
Address _______________________________________
City ___________________________________________
State/Zip ______________________________________
Signature/Date ________________________________
TESTED AND CERTIFIED TO ANSI/NSF® 42 & 53 FOR SPECIFIC CONTAMINANT CLAIMS AS VERIFIED AND SUBSTANTIATED BY TEST DATA
model WHAF-0435AC
(model WHAB-6011)
CARBON FILTERS TESTED: 1m Extruded carbon, Lead/Cyst
Influent challenge Max.permissible
concentration mg/L product water
concentration mg/L
0.081 0.001
0.081 0.001
0.078 0.001
0.270 0.0016
0.042 0.001
0.160 0.0005
0.084 0.0046
0.150 0.0005
0.180 0.001
0.015
0.300 0.015
0.300 0.015
0.300 0.015
0.070 0.001
SELLER:
Name __________________________________________________
Address ________________________________________________
City ____________________________________________________
State/Zip _______________________________________________
Signature/Date __
Drinking water
regulatory level
(MCL/MAC) mg/L
---
0.005
1.000
0.050
---
0.070
0.200
0.005
0.005
0.080
0.080
0.080
0.080
10
________________________________
1
17