4.9
Camera Control
4.9.1
Add (pair) a camera
1. Press M when the Parent Unit is in camera viewing mode.
2. Press
or
3. Press
or
4. Press the O button to confirm,
5.
Press
or
O button to start searching for a amera unit. The green audio level
LED will flash rapidly while searching.
6. Press and hold the PAIR button underneath the camera unit until the
parent unit finds the camera, beeps and the picture from the camera
appears.
NOTE
A camera can only be registered to one parent unit at any one time.
4.9.2
Delete a camera
1. Press M when the Parent Unit is in camera viewing mode.
2. Press
or
3. Press
or
4. Press O button to confirm,
5.
Press
or
button to delete that registration.
Note:
You are not allowed to delete the camera if there is only one registered camera
in the system.
18
button to scroll to
button to choose
button to select the desired camera position, and press
button to scroll to
button to choose
button to select the desired camera, and press O
.
add)
(
.
will pop up.
.
delete)
(
.
will pop up.
Parent Unit Menu Options